DIY Screen Print

Calico Skies has shared a super neat tutorial on how to create your own DIY Screen Print Tee.  With simple materials, your own design can grace your garb!

Always searching for new ways to inspire our inner fashionista, we were ready to give screen printing a try!

 

Please click here to visit Calico Skies and see the instructions that we followed!

 

Reviewer #1 – Amanda

Mission: Create a semi-professional looking screen print for my dino loving middle child.

 

 

Details:

  • 6″ Plastic Embroidery Hoop
  • Mod Podge Original Gloss Finish
  • Martha Stewart High Gloss Beetle Black
  • Bing image of T-Rex
  • In the original post she used nude panty hose but all I had was black and with the help of a metallic pen that worked out just fine.

    Tips & Tricks Learned:

    The Mod Podge application goes on the side of the embroidery hoop that will lay flush with the item you are printing on. I think that doing a couple of coats may help make the image a little more clear too.

    I would suggest picking a basic shape for your first attempt. I think the image I chose was a little more advanced for this amateur screen printer.

    Getting the nylons really tight on the embroidery hoop is key! I feel like my first attempt it was a little loose. I plan to correct this issue the next time I try this.

    Pros:

    Not too many supplies needed that you may not have. I did have to purchase the embroidery hoop but that was it. Not bad for creating a unique looking t-shirt.

    Cons:

    Live and learn. Sadly if you LOVE the shirt you are printing on you may be disappointed with a less than perfect result. I felt better after doing a little test print on a piece of paper before making it “happen” on my little guy’s shirt.

    Conclusion:

    I already have a unicorn in the works for my daughter and niece. I can’t wait to see if my little adjustments make a difference. This could be an addicting craft for sure…I may run out of surfaces!

     

     

    Reviewer #2 – Sarah

    Mission: To doll up some plain T’s and try my hand at screen printing!

     

    Details:

    • I was racking my brain as to what I should do for a t-shirt design and finally landed on going with a CrossFit inspired design. If I haven’t mentioned before, I CrossFit and I am OBSESSED!!! After a bit of research, I landed on a design with a kettle bell – I love me some kettle bell!
    • Outside of purchasing the embroidery hoop, the Mod Podge and the t-shirts, I had the remaining elements on hand.
    • I used the Martha Stewart Crafts satin all-in-one paint and my favorite Martha Stewart paint brushes.
    • Maren had lots of panty hose handy (don’t ask!) so she supplied those.

    Tips & Tricks Learned:

    A few of us Crafty Collaborative gals got together to start this lovely craft, though we weren’t able to finish them together since it was a bit of a time suck. I tell you – that Mod Podge takes a hell of a long time to dry!!! And, if you want your edges to be PERFECT…you better plan on doing a few coats.

    After completing this craft, I’d recommend using a fabric only paint vs. an all-in-one paint. The Martha Stewart Crafts all-in-one paint is fantastic, but I had a bit of trouble with my red heart bleeding (no pun intended!) after the first wash.

    In addition, I would recommend not putting the paint on super thick if you are using a thin shirt/fabric as mine bled through causing it to become rough and folded when I was wearing it.

    Make sure when you are doing this that you put the Mod Podge on the side of the hose that will be lying flat against your fabric surface. AND, most importantly, if you are doing any sort of typeface, make sure you place it on so that when you screen print, it will read correctly and not backwards – this took me awhile to figure out.

    Pros:

    A fun way to dress up an old t-shirt or show off your favorite things in a wearable form!

    Cons:

    This project took longer than I had planned due to the application of many layers of Mod Podge as I was pretty finicky in applying it wanted to end up with clean edges.

    Conclusion:

    I was excited about this project and enjoyed doing the process, but wasn’t as excited with the outcome as I had hoped. I’d love to try this again sometime, but will modify a bit. And, if I for some reason I plan to do a lot of screen printing in the future, I may just find myself a Gocco screen printer online!

     

     

    Reviewer #3 – Janet

    Mission: First thoughts on the project: Looking at the instructions, I figured that Lauren on Calico Skies was making it look way cooler/easier/beautiful than it really was going to turn out. Honestly, I wasn’t looking forward to this project.

     

    Details:

    • I had an embroidery hoop, but thought it would be too small for my project. I purchased a humongous one, which I actually didn’t even end up using, because the small one worked perfectly.
    • Thanks to all of the other TCC projects, I already had acrylic paint (Martha Stewart’s Wedding Cake in satin), Mod Podge, and brushes on hand.
    • I used a green tee that I already had in my closet from this summer and Maren provided the hosiery at our TCC gathering!

    Tips & Tricks Learned:

    Figure out your design before you buy an embroidery hoop so you know what size to get.

    I suggest three to four layers of Mod Podge so you don’t miss any spots.

    Don’t select an intricate design…you will drive yourself crazy trying to get the Mod Podge on just right.

    Pros:

    Actually was very easy (though I didn’t believe it would be from the looks of the instructions) and had minimal mess.

    Cons:

    The lines didn’t turn out as crisp as seen on the blog. I think if I would have put a little more time into painting the Mod Podge on smoothly, it might have helped.

    Not sure how well the shirt will go through the wash, but it was so cheap to make that I won’t be upset if it doesn’t make it out alive.

    Conclusion:

    Gotta love not having to spend 1 penny on a project! (blessing in disguise that I didn’t have to make yet another trip back to the craft store…I never come out of there without an impulse buy!) This is a great way to spice up an old T, or even make a festive outfit, like my shamrock that I will be rockin’ on St. Patty’s!

     

     

    Reviewer #4 – Maren

    Mission: To learn how to screen print!  This seems like a really neat and cost effective way to transfer images at home.

     

    Details:

    • I’m from Minneapolis where some of the bad-a$$ kids have “612” tatts, which is the area code.  Since I’m more of the “work-from-home” bad-ass, I decided to emblazon one of my favorite sweatshirts with the digits.  LOL
    • I found a great neon orange fabric paint called Neon Fiesta Orange.  So… it’s glittery.  How did I not notice that when I bought it?  This might hurt my street cred.
    • I used a Small Wash Brush to paint on my Mod Podge Hard Coat in Satin Finish.
    • I happened to have a lifetime supply of those knee-high panty hose that you buy in the little plastic bubble at the drug store for a buck from my days in the salon (I would stuff them to use to fill out elaborate updos.  These came in handy for our project!

    Tips & Tricks Learned:

    It took me an embarrassingly long amount of time to figure out which way to draw the design on.  I way over-thought this step.  Just make sure that you are able to put the nylons down flat against the transfer surface.

    It also took me a couple tries to get the nylons really taut.  I think that this proved to be really crucial in getting a good print, as Lauren from Calico Skies mentioned in her instructions.

    I think that I applied 5 or 6 layers of Mod Podge  to make sure that the edges of the design were perfect.  You do need to wait a few hours in between coats, so be prepared.

    When I was done transferring my image, I hustled to the sink and gently rinsed the paint off with warm water.  The Mod Podge looked a little gummy, but I let it dry out and it’s ready for the next 612 screen print!

    I washed my beloved sweatshirt inside out in cool water and dried on regular for the first time and it the design held up perfectly!  It may have even looked better!

    Pros:

    LOVE IT!  I also really like the way the fabric paint turned out!

    This project was easy to do and super inexpensive!

    Cons:

    To get a crisp print, you’ll need to take the time to get it right.  This project took me a total of about 4 days.

    Conclusion:

    I really liked this project!  Even though it took a few days to complete, I was very happy with the results.  I am already thinking of other projects that could benefit from a little screen print action!

     

     


    The lovely
    DIY Screen Print Tee and it’s photo by Calico Skies


1 Comment

Trackbacks/Pingbacks

  1. DIY Screen Print | OneMommysThoughts - [...] out my version of this adorable DIY Screen Print  originally posted by Calico [...]

Leave a Reply


%d bloggers like this: