Do you remember making forts when you were a kid like we do?  Our hearts fluttered when we saw the A-Frame Pup Tent by Lindsay & Drew thinking about how much fun it would have been to have a fun little spot like that!

 

Time to bust out some power tools and make a tent!  Next stop, a campfire with cowboys in the desert, or maybe we’ll be astronauts building a house on the Moon!

 

Please click here to visit Lindsay & Drew and see the instructions that we followed!

 

Reviewer #1 – Amanda

Mission: Put my hubby to work (and his power tools) to create a playful little hide out that my kids will enjoy and will be easy to store.

 

Details:

  • I busted out an old flannel flat sheet of my daughter’s for this project. In our house flat sheets are not our friends so we put it to good use. It was twin size and perfect for this project.
  • I put my hubby in charge of purchasing the other supplies and although I was VERY specific he still felt the need to deviate and purchased a larger PVC tube. He of course gave that a try and realized that as usual I was correct in my original request. Never cross a momma on a mission!
  • We ended with the same materials used in the original post plus a little coupling to hold the wood in place and keep the tent a little more stable.

Amanda - Tent 1

Tips & Tricks Learned:

The coupling made a huge difference! I highly suggest it.

Also, it is key that you attach the inner wood piece to the inside of the A-frame and not the bottom. It will keep the whole thing more stable and may actually reduce the need for the coupling.

You may need to sand the inside of the whole slightly in order to fit the PVC inside it. That was our experience anyway.

Amanda - Tent 2

Pros:

The materials needed are fairly cheap and easy to find.

I felt it was such a bonus to use old sheets but I bet you could find them on the cheap at a second-hand store!

Think of all the fun your kids could have inside on a rainy day or outside when it is hot.

Cons:

I am not all that comfy with power tools so I left that part up to my hubby.

I would be very interested in learning how to use them…maybe in my next life.

Amanda - Tent 3

Conclusion:

This was a huge success.  Now to build two more so my kids will stop fighting over the one we have already built.

 

 

Alicia - TCCReviewer #2 – Alicia

Mission: Create a cool, foldable tent for my kids!

 

Details:

I was super excited to give this a try- how hard could it be to make an A-frame tent?! Apparently HARD!!! Holy-heck this project was a pain in my rear.

I carefully read all the directions and set out to Home Depot for supplies.

  • I guess I was totally not paying attention and purchased 3 1×1” boards (which required 1×2),
  • ¾” PVC pipe, caps and my hubby’s brawn to saw and attach. Yeah right!

So we begin to drill and noticed that the PVC pipe is ¾” in the middle and about 1” total in diameter. My hubby has a ¾’ drill bit and there was no way, even with wiggling the drill bit back and forth, it would fit. Back to Home Depot to purchase a 1” drill bit at $15 bucks- oh gesh! At this point I think Mark is about to leave me- seriously!

Alicia - Tent 1

Tips & Tricks Learned:

Make sure, absolutely sure that you get all the correct boards and measurements for this job. It is pretty intense.

If you do purchase smaller boards, be careful not to split the wood with your drill (which totally happened to us). Home Depot loved us that week.

Alicia - Tent 2

Pros:

The final product is really cool.

Cons:

It is a little advanced for me. Not as easy as I thought.

Also, this tent is huge. I mean 5 feet long HUGE, but it does fold up.

Alicia - Tent 3

Conclusion:

I think I bit off a little more than I could chew with this project. Mark pretty much took this project over from start to finish. I think I attached the caps and helped staple on the fabric. My kids’ absolutely love it, though. My son has been under this thing for days; he has even been sleeping under it.

 

 Tent Conclusion


The darling
A-Frame Pup Tent and photo by Lindsay & Drew


read more

If you have been searching for the perfect place for your beloved mason jars, look no further than Not Just A Housewife and her darling Mason Jar Wall Planter.  Not just for your indoor herb garden, this pretty piece can be used for storing all kinds of stuff!

 

Round up the jars and a drill; we could hardly wait to dive into this project!

 

Please click here to visit Not Just A Housewife and see the instructions that we followed!

 

Reviewer #1 – Sheri

Mission: This just looks awesome, and I have wanted to try it for a while. What a fabulous and unique way to brighten up my kitchen.

 

Details:

As far as directions go, I didn’t find them to be very clear. The final pictures were great, but I would have loved to have seen more of a step by step. Lucky for me, my husband was there to help.

  • My first step was taking care of the drainage. I added rocks to the bottom of the jar, but after reading comments and suggestions on the blog post, I put a straw in for some extra air. I then planted my plants into the mason jars. To be honest, what a pain in the behind. I managed to squeeze them in there, but getting the soil snug around the roots was difficult and I missed a few spots. I’m hoping they survive.
  • I found a great board and cut it to size.
  • Now getting the pipe clamps screwed to the board…I had to call in the big guns, Mr. Hubs…and we broke one or two drill bits trying to do so.  His extra set of hands were also helpful in tightening the mason jars into the clamps and screwing the board to the wall.

This project is definitely a two person job. We had a much needed beer together afterwards.

Tips & Tricks Learned:

Duct tape a straw for extra drainage. Just make sure you put it in the back when you clamp the jar. Make sure you have good quality drill bit to put a hole through the metal clamp. Screw the hole first and then screw the clamp to the board

Sheri - Planter 1

Pros:

It looks remarkable.

Cons:

Getting those plants into the small mouth of the jar is difficult. Oh, and the broken drill bits. I’ll be replacing those for my husband.

Sheri - Planter 2

Conclusion:

We absolutely LOVE the final outcome. It came out great. I find myself just staring at it while waiting for my coffee to brew. I hope the plants survive. I would love to do one with herbs.

 

 

Reviewer #2 – Kristy

Mission: I love the idea of growing fresh herbs and making a lovely piece of wall décor!

 

Details:

Maren and I got together for this project as I felt it was a bit intimidating and a great excuse to get together!

Tips & Tricks Learned:

5Stain or Paint your board if you want to. Maren and I decided to go bare finish as you can always change it later.

Be sure to measure where your planters will need to be hung, then predrill your holes on the board.  Be sure to also drill holes for hanging!

Ok, here was the tough part, drilling through the metal holders. Just picture Maren with the drill and me fearful of this gal drilling into my fingers as I had to hold metal holders in place.  (Fear left with each cocktail we had…be careful!  Ha!!) Maren was having issues getting the drill through the metal so plan B, she grabbed her pink hammer to nail through it.  Bad idea did not work, just bent the nail.  We went back to the drill and replaced with a new battery then bam…worked perfectly. Well…a couple of broken drill bits later!

Once the holes are drilled, fasten the metal hangers onto boards then you are ready to fasten your awesome jars!

Best tip, when working with the metal hangers loop the tail end to the screw end then just start turning to the right to tighten. It is a simple as that, but we had to learn this.

Maren had a bright idea, to place rocks at the bottom of the mason jars…not only is it cute but I would assume it is also supposed to help with the plant’s survival.

M + K Planter 1

Pros:

Super cute wall décor and a great way to cook healthy with fresh herbs on hand!  There are such a wide variety of fresh herbs so the options are endless!  As for the board, you could be so creative with jars or painted boards!

Cons:

Holy cow, the metal hangers…you need some muscle action and a full battery to break through those, but well worth it!

Kristy - Planter

Conclusion:

Love, love, love! Get your favorite herbs and get busy!  I hope to make these for a few of my real estate clients that love gardening!  I know they will love this gift as much as I do!  My plants are thriving indoors…now Maren has a different story!

 

 

Reviewer #3 – Maren

Mission:  I was so excited to try this project out, I love to have fresh herbs.  This is the perfect way to get a start on some gardening as well, since we don’t have a yard quite yet at our new home.  Kristy and I did this project while our husbands cooked burgers on the grill!

Details:

I didn’t have time to hit the store for all of my supplies so I hit up Amazon instead.

Then, I had no idea how big they were or what size of clamp to order, until I found the All American Canner site after a quick Google and got the dimensions of my jars!

Kristy‘s honey grabbed a few of our items at the Home Depot:

  • The dimensions of my oak board were 5″ x 22″ x 3/4″
  • Our screws were 3/4″ long with a flat, Phillips head.
  • For my plants, I chose Moroccan Mint, Italian Flat Leaf Parsley and Cilantro.

Tips & Tricks Learned:

Don’t drink and drill.  You heard me.  This was probably my biggest take-away of the night.  Kristy and I took a dinner break and when I came back to finish the project, I wasn’t um, quite as qualified for the job.  I almost amputated my finger trying to push a screw in, when after [what felt like] 15 minutes we realized that the drill was set on “reverse”.  Nice.

Use the Phillips-type drill bit to make the holes in your clamp.  We tried drilling and nailing and both were total failures.  The only thing that worked was pushing the Phillips bit into the clamp while running the drill.  I needed Kristy‘s fingers to keep the clamp open while I pushed and drilled.

Don’t cry if you break a drill bit.  I broke two.  I think that it didn’t help that I had my board sitting on a towel instead of a solid, flat surface.  That of course, and the booze.

The clamp closes by a screw mechanism running along a little track.  Having said that, tightening the clamp by hand could take a while.  Save yourself some time and use your drill – just be sure to go slowly so you don’t take off and break your jar.

Be sure to add little rocks on the bottom for drainage!

Put your plants in before you tighten the clamps around the jars.  Duh.

Do not over-water your cilantro or leave it outside in cooler temps unless you want it to die in 3 days.

Be sure to also have a trusty Quality Assurance Supervisor nearby.  See if you can find ours in the photo below!

Maren - Planter 1

Pros:

This project was easy to do and cute as heck.

Cons:

“Don’t drink and drill.”

Maren - Planter 2

Conclusion:

Since my initial review, I have painted my board aqua and now love my planter even more!  I did give my Cilantro the ax after a few days, but have high hopes for the plant that takes it’s place!

I have also already started on a second planter to use to store my paint brushes – the long ones that don’t really fit anywhere else.

 

 

Reviewer #4 – Sarah

Mission: Any project that uses Mason jars is a project I’m instantly going to try! I love them to pieces!!

 

Details:

I love the idea of this project so much, but honestly am not a good houseplant owner, as they always seem to die on me at some point. So I instead opted to create this project to store my jewelry tools for my Sarah Vonne creations.

  • Mason jars can always be found in my house, so I searched through my supply and found two of the three, wide mouth, quart size Mason jars. The lovely Maren loaned me the third and also had extra clamps for me to use!
  • We still have lots of extra barn wood from my grandfather’s barn that was torn down late last year – this is the same wood I used in the Knob Organizer review. I just love it as it is a constant reminder of my grandfather and anywhere I can sprinkle it into a project, I just have to! My husband helped me pick out the right board for this project and did all the hard carpentry work for me.
  • The barn wood needed to be cut down to size for use on this project, so my husband took care of that with the table saw. We opted to leave the height of the board as it was and just cut it down to 22” in length. I wanted to maintain as much of the character of the board as we could.
  • Once the board was cut, we drilled holes into the metal brackets and then screwed them into place on the board. After this, I slid each of the Mason jars into place and tightened the brackets with a screwdriver until the jars were secure.

I have yet to secure it to the wall above my crafting table, but I have placed all of my jewelry tools within the jars so I’m ready to set up shop.

Tips & Tricks Learned:

Find your handsome hubby and put him to work! Just kidding, this isn’t a mandatory, but I always love  when mine is willing to help.

Sarah - Planter 1

Pros:

Purposeful – which is a factor I absolutely love! And, this project has an array of uses for each individual out there; a planter, a tool holder, a utensil holder, etc.

Cons:

In my case, I needed a handy man, so it would have been a bit difficult for me to finish this one on my own.

Sarah - Planter 2

Conclusion:

Love it and can’t wait to get it secured onto the wall.

 

Planter Conclusion


The darling
Mason Jar Wall Planter and it’s photo by Not Just A Housewife


read more

Eat. Sleep. Decorate. has the perfect solution to the towel clutter in your bathroom with DIY Knob Organization.  In fact, this project can be used to tackle messes all over your home and look good doing it!

 

Eager to tidy up and add beauty to our homes, we wanted in on this DIY Knob Organization action, pronto!

 

Please click here to visit Eat. Sleep. Decorate. and see the instructions that we followed!

 

Alicia - TCCReviewer #1 – Alicia

Mission: I have always loved the idea of creating a handmade and unique towel rack for the bathroom out of a few materials and there is nothing more empowering than a lady using a power saw, although I did not need to use one. Boohoo!

Details:

  • Tools needed: Wooden board at any length, knobs or pulls, spray paint, painters tape if you are creating any type of pattern and power tools for cutting, drilling, hanging, etc.
  • My Dad is an amazing wood crafter, although I wanted to tackle this project on my own. I found a scrap board in his workshop about 18” long and 7″ wide. Perfect!
  • I also used my Dad’s power drill to make 4 holes. Now we are rolling!
  • In the original project she used door knobs that were super long and needed to be cut. I was a little frightened by this. Sawing/cutting any type of metal is not my idea of fun. I found some beautiful (and short) drawer pulls at Menards that did the trick.

Tips & Tricks Learned:

I originally painted my board white and thought it was a little boring for my taste and my spare bathroom with white walls. So then I added blue stripes and that looked terrible. I finally repainted over the white and blue with a soft gray. Still boring!!!

I finally decided on keeping the gray and adding a white chevron pattern.

Alicia - Hanger 1

Pros:

Fun project!!!

Cons:

PAINT! I had a heck of a time spray painting. If you do not use slow smooth strokes, the paint can look thick and goopy.

I used about 8 coats of paint all together, but I am nuts! When using painters tape, make sure you really push it down securely.  With my first go around with the paint I was positive the painters tape was secure. When I peeled the tape back, the paint has bled in spots. Hence it took me 8 coats. LOL!

Alicia - Hanger 2

Conclusion:

This was such a fun project for me! I am super happy with the end result and very pleased with how my chevron pattern turned out. I scoured the web to find “creating chevron for dummies” and then determined THAT was too complicated, so I created my own pattern.  Not bad, if I do say so myself.

 

 

Reviewer #2 – Maren

Mission: With a new home, I have been anxious to add little things here and there to help give this place a personal touch.  I know that a home’s character grows with time, but I wanted to kick that plan into high gear.  This project had perfect timing, as we had yet to have a place to hang our coats!

Details:

  • We picked up a 56″ long 5″ x 1″ board from Home Depot to fit into our “Owner Entry” as our builder calls it!  We lightly sanded the cut end and were ready to go!
  • My husband and I painted the board with three light coats of White Dove by Benjamin Moore, which is the same color as our trim in the home.  We have plenty left over!
  • I then sprayed a coat of Krylon Satin Finish over the painted board to keep the paint from getting worn down as easily by repetitively hanging up coats over time.
  • We had some left over knobs from our build that I got at Lowe’s.  I really love how chunky these knobs are and couldn’t help but think that they would be perfect for hanging our coats on!

Tips & Tricks Learned:

Maren - Hanger 1Here’s a secret you may not know, Home Depot will make wood cuts for you!  I learned this in college when I needed to get Masonite to paint on.  That stuff only comes in huge panels, so they would always kindly cut them up for me.

Measure twice, pound the nail in once.  Learned this the hard way hanging the overhead shelf just prior to this coat rack.

Remember to use a wall anchor that suits the weight of the item that you’re hanging.  We went heavy-duty since this piece will get a lot of use.

 

Pros:

I absolutely love this!

The project was easy enough to do on my own, but also a great project to do with my honey… that is until we tried to hang it.

Cons:

Hanging it.  Apparently just because your home is new, doesn’t mean that the walls are perfectly flat.

I will also admit that my husband and I don’t always excel at doing home projects together.  For example, we have outlawed assembling any furniture together.  But hey – you’ve gotta know what works for your own relationship!  We eventually got this mother on the wall and it looks terrific!

 Maren - Hanger 2

Conclusion:

I am so happy with this piece!  It instantly added character to our home and gives it a loved and lived-in feel.  I think that I’ll whip up a smaller version for my closet, and even one for my grocery totes right inside the door to the garage!

 

 

Reviewer #3 – Kristy

Mission: Its multi-functional, keeps my jewelry organized and is a fun piece of art!

 

Details:

  • I chose a fresh-cut of Poplar wood which cost me about 4 bucks.
  • I went to Michaels and bought each variety they had.  I got 4 for 5 bucks.  Perfect!

Tips & Tricks Learned:

Break out the ruler or a smaller measuring tape to mark your screw holes! My handy-dandy husband drilled the holes. Be mindful of this as each one of my knobs had a different screw width.

My poplar board was unfinished so I painted with the black spray paint I had on hand!  I will admit I was lazy I just decided to spray without priming and hope for the best! Well it needed two coats, I may prime next time.  Priming would probably help with a better finish, too.

Screws were too long on a few of the knobs preventing me from hanging the board so my husband had to assist again with bolt cutters.

Pros:

Looks great, definitely multi-functional and can be used to display and view your jewelry, handbags or scarves!

Also inexpensive – even less if you can find scrap wood and knobs from old furniture.

Cons:

Measuring! It seems no matter how much time I spend trying to get the screw holes straight, they end up not being exactly right!

Kristy - Hanger 2

Conclusion:

Very cute, needed help from the hubby on this project! It was easier to have him help hang, drill and cut the screws!

A client once told me, “Everything in your home should be beautiful and functional OR don’t buy it!”  I love this motto and I am trying to live by it. This is a perfect example of one of those beautiful pieces!

 

 

Reviewer #4 – Sarah

Mission: To create a proper place for ourselves and our house guests to hang their coats!

 

Details:

Though this project was specifically purposed for a towel hanger, we just weren’t in need of that in any of our bathrooms. Instead, we needed a coat rack within our mudroom. This project was just the inspiration we needed to get that checked-off our house project to-do list.

I grew up on a farm in Iowa and recently, we had to tear down one of my grandpa’s barns as it was soon to fall over on its own. My dad and my husband gathered as much of the barn wood as they could so we could create a new life with it in new projects. This was the first project we got to use it for!

  • Sarah - Hanger 1My husband helped pick out the best piece we had for this project – we needed it to be as flat and level as possible and we wanted one with some character. The one we ended up with is perfect in my book!
  • We didn’t do anything else to the piece of wood – just left it like it was on my grandpa’s barn and we didn’t even have to cut it to size – it was perfect.
  • Because the piece of wood we used wasn’t the same width the entire board, we improvised on our hook placements and did our best to eye them centered on the board.
  • My husband did all of the hard work of drilling the holes for the hooks and he helped screw them on the board as well. I was the “eye” for placement and of course picked out the awesome rugged hooks. I found those at Anthropologie and got them for a pretty good deal!

Tips & Tricks Learned:

Find hooks/knobs that speak to you – such a fun project to really personalize!

Find a helper and put them to work – my husband was the perfect person to help me with this one! I could not have completed this without him…okay, maybe I could have, but there may have been some swear words in the mix then.

Pros:

Purposeful project!!!

Cons:

A bit labor intensive for the beginner.

Sarah - Hanger 2

Conclusion:

We absolutely love how this turned out and it is one of the best pieces of décor in our house as it has a fantastic purpose and a lovely history. For me, it is a great daily reminder of my grandpa and my family roots back in Iowa.

Next up we’d like to try creating a full-length mirror with some of the barn wood!

 

Knob Conclusion

 

The darling and clever Knob Organization for Towels and it’s photo by Eat. Sleep. Decorate.


read more


%d bloggers like this: